CO2-brine interfacial tension correlation based on the classical orthogonal polynomials: monovalent salts with common anionG. Reza Vakili-Nezhaad, Ahmed Al Shaaili, Reza Yousefzadeh, Alireza Kazemi, and Adel Al Ajmi Department of Petroleum and Chemical Engineering, College of Engineering, Sultan Qaboos University, Muscat, Oman
E-mail: vakili@squ.edu.om Received: 13 October 2023 Accepted: 9 January 2024 Abstract: Accurate estimation of CO2-brine Interfacial Tension (IFT) is of great importance since it is required to model the residual/capillary trapping of CO2 in geological formations. In this paper, a novel correlation is proposed based on the classical orthogonal polynomials to estimate the CO2-brine IFT of monovalent salts with common anion. To do so, CO2-brine IFT samples composed of samples from the literature and experimentally measured values using an in-house high-pressure high-temperature IFT measurement device were collected within a wide range of temperatures, pressures, and salinities. The utilized brines included NaCl and KCl salts. Then, a predictive model was developed based on the Group Method of Data Handling approach as a function of temperature, pressure, and ionic strength. The proposed method was compared with four methods from the literature in terms of average absolute percentage error (AAPE), coefficient of determination \({R}^{2}\), histograms of error, and percent error plots. Results showed the superiority of the proposed method over other methods with an AAPE of 9.85 and \({R}^{2}\) of 0.719. Also, it was shown that the proposed method did not produce too large errors, contrary to other methods. Therefore, the proposed method can be used reliably as a tool for CO2-brine IFT estimation in CO2 storage projects. Keywords: Carbon dioxide; Greenhouse gas; Orthogonal polynomial; CCUS; Brine; IFT Full paper is available at www.springerlink.com. DOI: 10.1007/s11696-024-03321-9
Chemical Papers 78 (6) 3483–3493 (2024) |
Wednesday, November 27, 2024 
|
|||
© 2024 Chemical Papers |
|
|||
